Family-owned · Licensed & Insured · CSIA Certified
24/7 Emergency Service (617) 652-5282
Same-Day Service in Quincy & the South Shore

Stainless Chimney Liners in Quincy & the South Shore

A failing flue isn't fixable — but it is reline-able. We size, install, and certify stainless liners that will outlive your house.

Chimney Liner Installation

What it is & why it matters in Quincy.

Original clay tile flues crack, shift, and corrode — especially in coastal Quincy homes where decades of salt air have eaten the joints. A failed flue means smoke, carbon monoxide, and heat leaking into the wall cavity. The fix isn't repair — it's replacement with a UL-listed stainless steel liner.

We install for every fuel type: wood-burning fireplaces, wood stoves, gas appliances (B-vent and direct vent), and oil furnaces. All liners are properly sized to the appliance, insulated to code, and come with manufacturer warranties up to lifetime. Installation is one day for most single-story homes.

What We Solve

Common chimney liner installation issues we see in Quincy & the South Shore.

Every chimney we touch in Quincy gets the same diagnostic discipline — find the actual cause, fix it properly, and document the work. Here's a closer look at the chimney liner installation problems we run into most.

Wood-burning fireplace & insert liners

Open fireplaces and wood-stove inserts need flexible or rigid stainless liners properly sized to the appliance — too large and you lose draft, too small and you back smoke into the room. We size to NFPA 211 cross-section requirements, every time.

Gas appliance B-vent & direct vent

Switching from oil to gas almost always requires a new, much smaller liner — gas appliances produce far less flue gas and need tighter cross-sections to maintain draft and prevent condensation. We carry AL29-4C corrosion-resistant alloy for high-efficiency gas units.

Oil furnace & boiler venting

Oil heat produces highly corrosive flue gases that destroy clay liners and standard stainless. We install heavy-gauge UL-1777 listed liners with proper insulation for oil-burning equipment, common in Quincy's older heating systems.

Insulation for performance & safety

Uninsulated liners run cooler, condense faster, and corrode sooner. Every liner we install includes appropriate insulation per the manufacturer's UL listing and NFPA 211 clearances to combustibles. This is non-negotiable in framed chimney chases.

Lifetime manufacturer warranty

Our standard liner installations carry manufacturer lifetime transferable warranties on the liner itself. We register the warranty in your name and provide the documentation as part of the close-out package. If you ever sell the home, the warranty transfers.

Real estate & pre-sale liner installation

Quincy home sales often turn up cracked clay flue tiles during Level 2 inspections. A new stainless liner is the standard, fast remediation — typically completed in one day so closings stay on track.

How It Works

Done once. Done right.

Four clear steps — no vague pricing, no surprise add-ons, no rushed work.

1

Appliance & Flue Sizing

BTU rating measured, current flue documented, manufacturer specs cross-referenced. We size to NFPA 211 — never approximated.

2

Drop-In Installation

Old flue cleaned and prepped. New stainless liner dropped from the top, connected at the appliance, sealed at the top plate, and insulated to code.

3

Code Inspection

Full draft test, smoke test, and (where required) municipal inspection. Manufacturer warranty registered in your name.

4

Documentation

UL listing, manufacturer warranty, photo-documented installation file, and the inspection sign-off — all delivered by email.

What It Costs in Quincy

Transparent flat-rate pricing.

Single-flue stainless liner in Quincy: $1,800–$3,400 fully installed including insulation, top plate, and code inspection. AL29-4C alloy for high-efficiency gas: add $400–$700. Multi-flue or extra-tall chimneys: $3,200–$5,800. Heavy-gauge UL-1777 for oil: $2,400–$4,600. Every quote is flat-rate after on-site sizing — never approximated.

Keep It Healthy

Long-term maintenance.

Stainless liners are essentially maintenance-free for the wood/gas user. Annual sweeps include liner inspection from inside. Coastal homes benefit from waterproofing on the surrounding masonry to keep moisture from migrating to the liner-to-flue gap. After a fire or major impact, schedule a Level 2 inspection to confirm the liner is intact.

Service Area

Based in Quincy.
Serving the South Shore.

Chimney Goat is a local Quincy chimney company providing premium chimney repair, cleaning, inspections, masonry work, liners, caps, flashing, waterproofing, and fireplace services throughout Quincy and the surrounding areas.

Locally owned — Quincy crew, Quincy phone. 5.0★ on Google · 153 reviews. CSIA-certified, BBB A+, licensed & insured in Massachusetts. Same-day service across the South Shore and nearby Greater Boston.

Service Areas

The exact cities & neighborhoods served from our Quincy Google Business Profile — based in Quincy, proudly serving the South Shore and nearby Greater Boston communities.

Not on the list? Send us your address — if you're nearby, we'll be there.

Free Quincy Quote · 1-Hour Response

Get your free chimney liner installation quote.

Tell us about your chimney — street/neighborhood in Quincy, what you're seeing, and any timing needs. We'll reply within one business hour with next steps and an honest estimate.

We reply within 1 business hour, 7 days a week. No spam, no call centers.
FAQ

Chimney Liner Installation questions, answered.

How long does a chimney liner installation take?+
Most standard installations are completed in one day. Multi-flue or extra-tall chimneys can take a second day. We schedule weather-permitting since we're working on the roof.
What does a chimney liner cost in Quincy?+
Most single-flue stainless installations are flat-rate $1,800–$3,400 fully installed, including insulation, top plate, and code inspection. Larger or more complex jobs quoted individually.
Do you install liners for gas appliances?+
Yes — gas appliance lining is one of our most common jobs. Switching from oil to gas almost always requires a new liner because gas appliances need a much smaller flue cross-section to vent properly.
Will the liner work with my existing fireplace?+
In most cases yes, with proper sizing. Open wood-burning fireplaces, wood stoves, and inserts all have different liner requirements. We confirm fit before we order materials.
Do gas appliances really need a new liner?+
Almost always when switching from oil to gas. The flue cross-section for an oil furnace is far too large for a gas appliance — moisture from gas combustion condenses inside the oversized flue, drips back down, and destroys the chimney from the inside. A correctly-sized gas liner solves it permanently.
Will a liner install affect my fireplace appearance?+
Not at all. The liner runs inside the flue from cap to appliance — none of it is visible from inside the home. The only visible change is at the top: a new cap and top plate that we color-match to the chimney exterior.
Trusted Standards

We work to the codes & standards that protect your home.

Everything we install, repair, or rebuild meets or exceeds the codes that govern chimney work in Massachusetts. We're transparent about which standards apply to your project — and we'll show you the relevant sections of the published code if you'd like.

Same Service Nearby

Chimney Liner Installation in nearby cities.

We bring the same Quincy chimney liner installation crew, same flat-rate pricing, and same workmanship guarantee to every South Shore and nearby Greater Boston town. Click any city for its dedicated chimney liner installation page.

Ready When You Are

Chimney Liner Installation in Quincy — booked this week.

Same-day appointments available across Quincy and the South Shore. Free estimate over the phone. A real person picks up — no robots, no call centers.

★ 5.0 on Google Reply in 1 hr · 7 days
Call (617) 652-5282 Quote